The Wi-Fi access point Mikrotik RBcAPGi-5acD2nD is perfect for placing on the wall or ceiling. The implemented 802.11ac MIMO 2x2 radio module is capable of supporting simultaneous operation in 2 bands, namely 2.4 and 5 GHz. The signal from the Mikrotik cAP ac access point spreads 360 degrees. Although the radio module has a repeater mode, the manufacturer still provided 2 Ethernet ports for expanding the network due to the usual cables, coupled with the fact that PoE power may be required. The cAP ac access point on the first port supports receiving power via 802.3af / at PoE, and on the second Passive PoE distributes. The RB-cAPGi-5acD2nD access point performs functions in the 2.4 and 5 GHz bands. It supports IEEE802.11b / g / n / ac wireless communication standards. The radio module has an output power of 30 dBm. In addition, the built-in antenna has a gain of 2dBi. The Mikrotik RBcAPGi-5acD2nD Wi-Fi access point only accepts power from the 1st Ethernet port using PoE. Therefore, the owner of this access point must either use the included passive PoE injector or manage to support the 802.3af / at PoE switch at the output in advance. During the maximum load, the consumption can increase to 13 W. And as mentioned above, port #2 can be used to connect a RouterBOARD device with passive PoE.
Characteristics
- Manufacturer
- Mikrotik
- Country of manufacture
- Китай
- Number of LAN ports (RJ-45)
- 2
- Compliance with network standards
- IEEE 802.3x
- Width
- 145 мм
- height
- 30 мм
- The depth
- 145 мм
- Feeding
- Зовнішній адаптер живлення, PoE
- Operating frequency
- 2.4 / 5 ГГц
- Antenna type
- вбудована
- Number of antennas
- 2
- Device type
- Wi-Fi точка
- Network standards
- Wi-Fi 5 (802.11ac)
- Maximum speed
- до 1.2 Гбіт/с
- Ethernet interfaces
- LAN 10/100/1000 Мбіт/с
- Operating range of air temperature
- -40°C ~ +50°C
- Set
- 1 точка доступу
Loading...
