Riser PCI-E x1 to 16x 60cm USB 3.0 Cable SATA to 6Pin Power v.006C Dynamode (RX-riser-006c 6 pin)

Modern video cards generate a lot of heat during operation and require constant cooling.
This requires free access of air, which is problematic in modern small-sized housings.
For this reason, in systems that include several video cards, it is better to place these devices at the maximum possible distance from each other.
To connect to the motherboard, in this case, you cannot do without special PCI-E bus extenders, which are usually called "risers" or "riser" (from the English word "rise" - to increase, to grow).
The PCI-E bus is used to exchange data from the computer motherboard of the connected device (in our case – video card).
The bus has several formats.
To ensure the full speed of operation, you should use a completely appropriate type of riser

Riser Dynamode PCI-E x1 to 16x 60cm USB Cable 3.0 SATA to 6 pin Power v.006C
6 pin power is suitable for server units, for connecting a PCI-E video card to a PCI-E x1 connector.
Version 006C.
The most reliable version of the riser.
The power is supplied through the 6 Pin connector, which ensures the highest quality of connection.
Reliable contact reduces the possibility of overheating and equipment failure.
Attention! In order to avoid emergency situations, make sure that the equipment is connected correctly.
Do not connect the risers to a switched-on power supply unit.
Start the system after installing and checking the equipment.
In the package: a USB 3.0 cable 60 cm long, a PCI-E 16X riser, a PCI-E 1X adapter, an additional SATA power cable, size 13x4.5x1.5 cm13x4.5x1.5 cm

Characteristics

Manufacturer

Dynamode

Country of manufacture

Китай

Application

для майнінгу

Loading...