Modernized adapter XoKo USB-C to DC7406 65W 20V 3A. The cable is designed to connect devices with a DC7406 power connector (7.4 by 0.6 mm) to a PD (Power Dilevey) charger with USB Type-C. The built-in flip-flop allows you to "trick" the PD power supply into high power mode. The trigger is a special electronic module that simulates the operation of fast charging protocols. The USB-C cable is capable of working at currents of up to 3A with fast charging devices of the PD standard. The cable can help automatically set the current within specification and ensure the device operates safely. Supports USB PD power supply from 9V/3A to 20V/3A, maximum 65W.
A cable with a built-in trigger is the most convenient solution for charging laptops. Trigger Logic: The output voltage will be less than or equal to the maximum value. For example, a cable with a 20V trigger When using a charger that supports 5V-9V-12V, the output voltage will be 18-20 volts. If the power source supports 5V-9V-12V, then the output will be 12 volts.
Adapter cable features:
- USB-C input with full rolling and maximum current up to 5 amps
- DC output connector 7406 (7.4 by 0.6mm): 0.6mm
- Center positive contact, outer negative contact 7.4mm
- Built-in PD trigger on inputs: Type-C male for 65W Type-C RAM
- Built-in electronic marker chip, maximum power 65W (20V/3A)
- Constant voltage DC 18V-20V (not support 5V)
- Low self-power consumption: current less than 2mA
- Internal resistance: less than 0.15 ohm, really measured approx. 0.1 Ohm
- Reliability: short-circuit current stabilization (CC) for VBUS, all terminals withstand 25 volts
- Length: 100 cm
Characteristics
- Manufacturer
- XoKo
- Country of manufacture
- Китай
- type
- кабель
- Length
- 1 м
- Connector 1
- USB type C
- Connector 2
- DC 7.4 х 0.6
Loading...
