Wi-Fi access point Mikrotik RBcAPGi-5acD2nD

Wi-Fi access point Mikrotik RBcAPGi-5acD2nD is perfect for placement on the wall or ceiling. The implemented 802.11ac MIMO 2x2 radio module is able to support simultaneous operation in 2 bands, namely 2.4 and 5 GHz.

The signal from the Mikrotik cAP ac access point spreads 360 degrees. Although the radio module has a repeater mode, the manufacturer still provided 2 Ethernet ports for expanding the network due to the usual cables, coupled with the fact that PoE power may be required. Access point cAP ac on the first port supports receiving power by 802.3af / at PoE, and on the second Passive PoE distributes.

The RB-cAPGi-5acD2nD access point performs functions in the 2.4 and 5 GHz bands. It supports IEEE802.11b / g / n / ac wireless communication standards. The radio module has an output power of 30 dBm. In addition, the built-in antenna has a gain of 2dBi.

The Mikrotik RBcAPGi-5acD2nD Wi-Fi Access Point only accepts power from the 1st Ethernet port via PoE. Therefore, the owner of this access point must either use the included passive PoE injector or manage to support the 802.3af / at PoE switch at the output in advance. During the maximum load, the consumption can increase to 13 W. And as mentioned above, port #2 can be used to connect a RouterBOARD device with passive PoE.

Wi-Fi access point characteristics

Number of LAN ports

2

Width

145 мм

Operating frequency

2.4 / 5 ГГц

Antenna type

встроенная/несъемная

Interfaces

LAN 10/100/1000 Мбит/с

Compliance with network standards

IEEE 802.11 b

Modes of operation

Wi-Fi точка

Network standards

ac (до 867 Мбит/с)

Article

RBcAPGi-5acD2nD

Manufacturer

Mikrotik

Model

RBcAPGi-5acD2nD

height

30 мм

Depth

145 мм

Country of manufacture

Китай

Warranty, month

12

Loading...