Stabilizer Quant Quant-16.5, 3x5.5 (Quant-16.5)

Quant-16.5 is a three-phase stabilizer with the option of single-phase operation with a phase control unit.

Quant-16.5 are three single-phase inverter voltage stabilizers Quant-5.5 that work together with a phase control unit. The main difference between Quant-16.5 and the usual three-phase stabilizer with a synchronizer is that it does not block the operation of single-phase consumers even if two phases fail.

Quant-16.5 is a voltage stabilizer with overshoot protection without energy storage. The stabilizer catches all jumps and voltage drops. Everything that happens at the input does not affect the output in any way. The output will always have the nominal value of the voltage - 220 V or 230 V to choose from. During the double conversion process, all harmful impulses and voltage surges are destroyed. The load is under the sensitive protection of the stabilizer.

Some types of three-phase loads require that all three phases:

- present at the same time (if even one phase is lost - an accident);

- did not have a large phase distortion in magnitude (voltages with a permissible spread);

- had the correct alternation of phases. When connecting, you can always swap the two phases so that the rotation is correct and the motors rotate in the right direction. But it happens that during repairs outside the connected consumer, after an accident, electricians can switch phases without the user knowing about it, and this will lead to an accident;

- were shifted to the correct angle of 120 ° (the wrong result may occur, for example, if the inputs of neighboring phases were accidentally connected to the same one).

Our phase control unit is built on the basis of a multifunctional protection device for the phase control relay from Novatek-Electro - RNPP 311M and Schneider Electric magnetic starters.

In the event of an accident with a three-phase power supply, for example: one phase is lost, or one stabilizer was overloaded and disconnected, a phase will also be lost, but at the output, or the electricians mixed up the sequence of phases (changed them) - only the phase control relay will work, and only three-phase loads will be disconnected. And single-phase loads should not pass through the magnetic starter, which is controlled by the phase control relay - they are separated by three lines, directly from the outputs of the stabilizers, as usual. In addition, there is an automatic device for turning off the starters manually.

Characteristics of voltage stabilizers

Protection from

повышенное напряжение

Size, mm

435х250х125 мм

Connection to a 220V network

клеммная колодка

Minimum input voltage, V

90 В

Installation method

настенный

Power, W

16500 Вт

Power, VA

16500 VA

Display of input/output voltage values

LCD дисплей

Country of manufacture

Китай

Ambient temperature

0 ~ 40 °C

Maximum input voltage, V

350 В

Stabilization accuracy

± 0.5 %

weight

11 кг

Phase

трехфазный

Article

Quant-16.5

Model

Quant-16.5, 3х5.5

Manufacturer

Quant

Warranty, month

12

Loading...