Deepcool Matrexx 70 case

A new concept, specially designed for the pleasure of self-assembly. Implementing many innovative design solutions, this architecture provides convenience and flexibility when building a PC configuration. As in the case of the mid-tower form factor, it has enough space to install an E-ATX form factor motherboard.

Easy to install side panels

The side panel is attached according to the scheme of 1 groove + 2 screws, which greatly facilitates installation. In addition, this unique mounting method ensures an even distribution of stress in the glass panel, thus reducing the risk of cracking.

Removable radiator mounting

The radiator holder simplifies its installation and replacement. This saves a lot of effort when you need to install a radiator or fans on different sides of the holder. The bracket allows the installation of a heatsink up to 360 mm or 3 x 140 mm fans.

Detachable tinted tempered glass PSU cover

In the Matrexx 70, Deepcool has creatively applied tinted tempered glass as the top cover of the PSU cover, which is a breakthrough in the industry.

Adaptive ventilation solutions with high performance

Thanks to air intakes on the front and upper panels, air outlets on the upper and rear panels, Matrexx 70 provides extremely flexible configuration of ventilation solutions. Also, a 15 mm hole in the front panel ensures sufficient air flow, and thanks to the low-friction material on all surfaces, cooling efficiency is maximized.

Graphic cards up to 380 mm are supported. Plenty of space is provided - 170 mm (tower compartment) and 30 mm (for rear cable routing). Four independent slots for 2.5-inch hard drives and two for 3.5-/2.5-inch hard drives. Since dust screens are installed on the top, bottom and front panels, they provide high-quality protection against dust and easy cleaning of the screens themselves.

Characteristics of the Corps

Number of internal compartments 3.5"

2

Location of the power supply unit

нижнее

Number of internal compartments 2.5"

4

Number of expansion slots

7+2

The number and size of installed fans

1 х 120 мм

Places for additional fans

Front 3x12/14 см

Availability of a power supply unit

без блока питания

Supported motherboards

Mini - ITX

Installation method

вертикальный

Manufacturer

Deepcool

Standard size

Miditower

Body class

Геймерские

Article

Matrexx 70

Dust filter

есть

Model

Matrexx 70

Support for liquid cooling

есть

External connectors

2 x Audio

Features

прозрачная передняя панель

Installation of long video cards

до 380 мм

The maximum height of the processor cooler

170 мм

The maximum length of the BP

200 мм

Body material

пластик

Color

черный

Country of manufacture

Китай

Warranty, month

12

Loading...