Bambu Lab A1 mini ComboMulti-color printingOptimization of the flow levelActive noise reduction of the motorEffortless connection and useFully automatic calibrationFast and accurate executionMulti-color printingThe new AMS Lite model is an elegant and reliable device that makes multi-color 3D printing possible for everyone.The flow level optimization of the A1 mini revolutionizes volumetric flow control in 3D printing. It uses a high-resolution, high-frequency sensor of electric currents to measure the pressure in the pipes. Our algorithm actively compensates the volume flow according to the received measurements for accurate emission. Automatic calibration The A1 mini automatically performs a variety of calibrations. It precisely calibrates Z-offset, bed level, vibration resonance and nozzle pressure for EVERY print automatically. Effortless plug-in and use A1 mini comes to you pre-assembled, aligned and set up with precision. It will only take you about 20 minutes to fine-tune before your first print. Active Motor Noise Reduction The A1 mini can calibrate parameters to account for small individual differences between each drive motor. This compensates for the unwanted noise level of the motor. The moving plate with CoreXY ensures speed and quality. Full metal guides, rigid frame, nozzle pressure sensor, accelerometers, a powerful microcontroller and, most importantly, an advanced motion control system that uses these features to print 'benchy' for 14 minutes with high quality and compliance with all speed regulations, right out of the printer's box, without the use of specialized filaments. Synchronization with Bambu Studio and Bambu HandyRemote control and monitoring of your printer via Bambu Studio or Bambu Handy. With the built-in camera, you can also record time-lapse videos.
Characteristics
- Manufacturer
- Bambu Lab
- Color
- Grey
- Country of manufacture
- США
- Interfaces
- Wi-Fi
- Display
- є
- Printing technology
- метод послідовного наплавления (FDM)
- Dimensions
- 385 х 410 х 430 мм
- Number of print heads
- 1
- Construction area
- 180 х 180 х 180 мм
- Maximum recommended print speed
- 1000 мм/сек
- Material for printing
- PLA
- Thread diameter
- 1.75 мм
- Nozzle diameter
- 0.4 мм
- Recommended print speed
- 500 мм/сек
Loading...
