Wi-Fi access point Mikrotik cAP lite (RBcAPL-2nD) is another small access point from the cAP line from Mikrotik. The difference between the lite version and its predecessor is the presence of an additional wall case. Now the access point can be easily mounted not only on the ceiling (like СAP), but also on the wall. In this version, the manufacturer paid a lot of attention to the design of the device. First, the access point itself has fairly compact dimensions and is inconspicuous, so it will easily fit into any design. Secondly, the designers offer the user files with different designs for the 3D printer. The cAP lite access point has 64 MB of RAM and a QCA9533 650 MHz processor, which allows it to withstand fairly high loads. The device works with a 2.4 GHz radio module and complies with 802.11n/g/b standards. However, everything is the same as in cAP 2nD. However, the hardware part of cAP lite is slightly different from its predecessor. The ceiling case has a diameter of 88 mm, while the cAP 2nD has a diameter of 185 mm. In addition, the lite version is equipped with an older version of the radio module - QCA9531 and has a weaker antenna gain - 1.5dBi. The access point has only one 10/100 Mbit/s port for connecting to the network. cAP lite supports PoE technology, respectively via Fast Ethernet, also connected to a 5-60V power source. The maximum power consumption of the device is 4W.
Characteristics
- Manufacturer
- Mikrotik
- Country of manufacture
- Китай
- Number of LAN ports (RJ-45)
- 1
- Compliance with network standards
- IEEE 802.11 n
- Feeding
- PoE/адаптер
- Operating frequency
- 2.4 ГГц
- Antenna type
- вбудована
- Number of antennas
- 2
- Device type
- Wi-Fi точка
- Network standards
- Wi-Fi 4 (802.11n)
- Maximum speed
- до 300 Мбіт/с
- Ethernet interfaces
- WAN 10/100 Мбит/с
- Set
- 1 точка доступу
Loading...
