CET
SKU:: CET7330/CET7094
Teflon shaft separator MINOLTA Di152/183, Bizhub162/163/180/210/220/164/184 (402157 CET (CET7330/CET7094)
108 ₴
Teflon shaft separator MINOLTA Di152 / 183, Bizhub162 / 163/180/210/220/164/184 (402157 CET (CET7330 / CET7094))
The Teflon or heating shaft is the main part of the fuser unit (tube) of the laser printer. Teflon shaft is a hollow metal cylinder, covered with a layer of thermally resistant Teflon. This coating does not allow the toner to stick to the surface of the element. A powerful lamp is installed in the cylinder cavity, which heats up to a very high temperature (+ 170C!) and the device is protected from overheating by a thermistor, which turns off the lamp after reaching peak values provided.
Over time, the Teflon coating wears off, and then the toner begins to stick to the shaft. As a result, streaks appear on the prints, smeared images, and often the paper comes out of the machine very hot or gets stuck in the thermal unit. In this case, the Teflon shaft, as well as the paper separation separators, need to be replaced.
The Teflon or heating shaft is the main part of the fuser unit (tube) of the laser printer. Teflon shaft is a hollow metal cylinder, covered with a layer of thermally resistant Teflon. This coating does not allow the toner to stick to the surface of the element. A powerful lamp is installed in the cylinder cavity, which heats up to a very high temperature (+ 170C!) and the device is protected from overheating by a thermistor, which turns off the lamp after reaching peak values provided.
Over time, the Teflon coating wears off, and then the toner begins to stick to the shaft. As a result, streaks appear on the prints, smeared images, and often the paper comes out of the machine very hot or gets stuck in the thermal unit. In this case, the Teflon shaft, as well as the paper separation separators, need to be replaced.
Characteristics
- Manufacturer
- CET
- Country of manufacture
- Китай
- Compatibility
- KONICA MINOLTA Di183
Loading...
