Pressure lever of the fuser KYOCERA ECOsys P2235dn/2040dn/M2235dn/2040dn CET (CET311032)

Fuser pressure bar assembly. The fabric cover installed on this bar is similar in characteristics to the original product, which allows it to be used with thermofilms on a polymer basis CET 7841, as well as with thermofilms on a metal basis CET311024. 2 ml of liquid high-temperature lubricant is supplied in the kit. Unlike the original design, the working surface of the base of the CET 311032 bar is formed by an elastic polymer insert, and instead of an orange film, a metal plate is installed on the back side. Therefore, for the long-term operation of the restored stove, 2 ml of grease should be applied to the pad completely, allowing the grease to soak into the fabric. The presence of the pressure bar CET311032 in the assembly creates the following advantages: The possibility of restoring the stove with a damaged original plastic base of the pressure bar Saving several minutes of time needed to remove the old fabric pad from the original base of the bar and install a new fabric pad Lower probability of damage to the fabric overlays during operation due to a metal plate that fixes the fabric overlay.

Characteristics

Manufacturer

CET

Country of manufacture

Китай

Compatibility with brand devices

Kyocera

Compatibility for printer models

KYOCERA ECOsys P2235dn/2040dn

Loading...