The HP OneLam 400 A3 laminator is an excellent solution for hot and cold lamination in the SоHо segment. Laminate documents, business cards, children's drawings, photos up to A3 format. The compact size of the laminator allows you to place it in any convenient place for you. The HP OneLam 400 A3 laminator works with films from 75/80 microns to 125 microns thick. The thickness of the document together with the film should not exceed 0.5 mm. Set the necessary temperature mode depending on the thickness of the film with the help of a clear functional button. The laminator will be ready to work with a film 80 microns thick in 2-4 minutes. With a lamination speed of 400 mm/min, you will receive a ready-made A3 document in 60 seconds. If you accidentally insert the film at an angle, it can cause it to get stuck. The ABS roller unlocking lever will help you cope with this - just press it and carefully pull out the film through the input tray. The device automatically switches to standby mode and stops the heating process after 30 minutes of idle time - don't worry if you forgot to turn it off. The HP OneLam 400 A3 laminator is equipped with a cutting ruler and a corner rounder, which are stored in a special compartment at the bottom device. A starter set of 15 films of various formats is also included in the delivery package - you can start laminating immediately after unpacking the laminator.
Characteristics
- Manufacturer
- HP
- Country of manufacture
- Китай
- Purpose
- професійний
- weight
- 1.8 кг
- Feeding
- 220~240 В
- type
- конвертний
- Dimensions
- 460 х 140 х 86 мм
- Format
- A3
- Maximum lamination width
- 330 мм
- Film thickness
- до 125 мкм
- Maximum lamination thickness
- 0.5 мм
- Lamination speed
- 400 мм/хв
- Heating method
- гарячі вали
- Sheet feeding system
- 2 вали
- Cold lamination
- так
- Lamination of photos
- так
- Reverse
- так
Loading...
