Cooler for the Zezzio ZH-C400 V2 processor

Zezzio ZH-C400 V2 is an updated version of the popular cooling system, which received support for mounting on the Intel LGA2011/2066 socket, an updated fan with lower minimum rotations and an updated, more efficient radiator with four copper tubes.

Using H.D.T 3.0 technology
A new version of H.D.T 3.0 (Heatpipe Direct Touch) technology is applied to the base of the radiator, with a more precise milling of the surface, which allows the cooling system to remove heat from the processor faster and more efficiently and interact more effectively with thermal paste when the base of the radiator is in direct contact with the surface of the processor.

Powerful radiator cooling
40 aluminum plates with a new shape, stacked one on top of the other, create a large area of the thermal surface, which provides 20% more heat removal efficiency than similar radiators with a cooling system with four copper tubes. The surface of the radiator plates are protected against oxidation

Productive fan
The cooling system is equipped with a 120mm fan with a hydraulic bearing and a built-in PWM controller, which is characterized by low noise and high performance. The maximum airflow is 62.47 CFM at a maximum speed of 1800±200 rpm. The maximum noise level is 37.1 dB. The fan is equipped with anti-vibration pads on each of its sides and is attached to the radiator with a bracket.

Vibration protection
The cooler is equipped with rubber pads that are installed on both sides of the product in each of its corners. Anti-vibration rubber cushions reduce the vibration from the operation of the cooler, which significantly reduces the noise from the vibration of the fan at a high speed of rotation of the impeller. When using this technology, the fan easily adapts to different rotation scenarios and effectively improves airflow.

Bolt mounting bracket
The upgraded new mounting bracket supports Intel LGA1150/1151/1155/1156/1200/1700 and AMD AM4 AM5 main platforms. Innovations in the design of the mount allow you to install the cooling system without much trouble. The mount ensures even distribution of the load when installing the cooling system on the processor, which increases the efficiency of heat removal.