Converter Dynamode 2.5'' SATA to M.2 (NGFF) SSD 22*30mm, 22*42mm, 22*60mm, 22*80mm (S103-1N-P)

Dynamode S103-1N-P Converter is designed to install an M.2 (NGFF) SSD into a laptop or computer instead of a 2.5" SATA. Thus, it converts an M.2 (NGFF) SSD into a standard 2.5" SATA III drive.

The M.2 SSD has a much higher data transfer rate than a regular 2.5" SATA HDD, and most importantly, it therefore, if your laptop suddenly falls, its weak point - the hard disk - will remain intact and safe.

Installing the SSD in the converter is easy - the board is inserted into the connector at an angle, lowered and fixed with a screw that screws into the rack. Supports 4 standard sizes M.2 (NGFF): 22x30 mm, 22x42 mm, 22x60mm, 22x80mm.

• SATA III transfer speed up to 6Gbps.
• Does NOT support M.2 Key-M PCI-E NVMe SSDs.
• M.2 SSD is not included in this converter, this M.2 SSD can be a bootable disk. No drivers required.
• Operating system support: Windows, Mac, Linux.
• The size of the converter is 100 x 70 x 7 mm.
• The housing is black plastic.

Characteristics

Manufacturer

Dynamode

Country of manufacture

Китай

type

SATA to M.2

Interfaces

M.2

Compatibility

комп'ютер

Loading...